Stabilizer Auriga Z
Auriga Z are vehicles with forks, equipped with load stabilizers which increases
the load capacity without using bulky mechanical structures.
The machine models are designed to transport any type of product.
The range goes from the traditional Auriga 25 Z which moves two pallets simultaneously
or an horizontal reel, up to the larger Auriga 60 Z,
which moves heavy loads up to 6.000 kg.
Auriga 25 Z, 40 Z, 60 Z models are usually used to move multiple pallets simultaneously, or horizontal reels.
High load capacity
These vehicles, being equipped with load stabilizers, can transport up to 6.000 kg, whilst being of reduced dimensions.
For its Auriga range, OCME applies the highest safety and technology standards existing on the market for what concerns LGV vehicles.
When discussing about LGV system safety, we do not only refer to vehicles, but also to the plant where these are installed.
In order to increase safety and minimize residual risks during the development phase of the project,
OCME carries out a detailed analysis of the risks, in agreement with the customer.
Furthermore, training courses are regularly proposed in order to raise awareness of the safety risks among operators.
Particular attention is always given to sustainability as well as savings on consumption:
- energy recovery during braking (Kers)
- AC motors
- high efficiency batteries (XFC Flex)
Thanks to these features, an extended battery life is ensured.
Auriga Z are designed to transport
any type of product.
The load capacity of Auriga Z goes from 2.500 kg for Auriga 25 Z, up to 6.000 kg for Auriga 60 Z.
Forks are lifted from 1000 to 2000mm, with a maximum speed of 1700 mm/second.
- automatic battery change
- manual battery change
- battery recharge by opportunity: battery recharge station
- waterless batteries: open lead acid, reduced maintenance
- gel batteries: lead-gel, no maintenance required and no gas emission during the charge
- XFC Flex batteries: pure lead, no maintenance required and no gas emission during the charge